What comes with the kit ?
   Shocktech Shocker Gun Kit comes standard with a custom milled, beadblasted and hard coat anodized Shocker body, A.S.A.
   grip frame with snatch grip and roller bearing trigger also included is a fully assembled Shocktech on/off Bottom Line with a
   Drop #1 and Shocktech clamping feedneck. All parts are shipped together to ensure color match. You can add matching barrels
   and regulators if you like for an up-charge. We recommend that you do this at the same time you purchase your kit. Should you
   opt to do it later we cannot guarantee sufficient color match to make you happy. Of course black and silver will match but not
   much else.

   Also we will throw in (at least for a limited time) at no charge a factory screw and pin kit. We know what it’s like to be halfway
   done and drop a screw in our black shag carpet.

   What else should I get?
   You of course need a used Shocker to transplant all the parts from a good supply of Smart Parts Shocker lube or
   Shocktech Gun Butta and maybe some back up o-rings, loctite, anti-seize.

   What high efficiency kits will fit this thing?
   We cut the body so it will match up with the Smart Parts bolt kit. There are a lot of aftermarket kits some good;
   some bad we like these. If any others match up it’s just luck.

   Who can do this?
   While the transplant itself is not that difficult you should not attempt it yourself unless you have a good aptitude for paintball
   gun mechanics.  We along with Smart Parts and several dealers will be happy to do it for you.  There will be a labor charge
   but you may find that more appealing than a very frustrating Saturday evening.

   Will my stock frame fit on your body?
   Yes, as will many aftermarket frames. You’ll be giving up some style points but it’s your call.

   Will you sell me just the body?
   No.

   Why should I drop $500.00 on this?
   We released the Shocker kit primarily due to frequent customer requests. These customers fall into 3 categories
   (for the most part).

   1. They’ve owned a Shocker for a while and are looking to switch their style up without starting over.
   2. Just picked up a used gun locally or on-line to use it as a parts donor for this project.
   3. Already have a bunch of money tied up in a heavily modified gun but it’s still a stock body.

   Rather than any of these people to get rid of what they already have and switch to Shocktech, we thought we would offer
   a compromise. Give ‘em what they want at a fair price. When your pricing everything out keep in mind we are using genuine
   (supplied by Smart Parts) Shocker body billets to machine our lightweight look into. This way we all know it’s right.

   What tools will I need?
   Philips screw driver
   1/8 allen wrench
   3/16 allen wrench
   1/16 allen wrench
   .5 allen wrench

   How long should this take?
   If you are a skilled gun tech approximately 1 hour.
   If you’re not approximately two to two and half hours.
   If you’ve never even cleaned your Shocker and you plan on playing Sunday you’ll want to start Friday and order in.

   Is this going to affect the resale value of my factory built Shocktech Shocker?
   1. The kit has no 100% upgrade policy that allows you to keep your Shocker current as long as you own it,
   right up until you sell it.

   2. Your factory gun came with a matching barrel, reg., back cap, and internal color match on the fire chamber.
   These are all up charges on the kit.

   3. Map on a new Shocker with vision is $799.99
   The Shocktech kit retails for:                 $499.99
   Total:                                                    $1299.98
   And you’ve still gotta build it!

   If you’re a Shocktech dealer and would like to be recommended as a shop that performs installation service,
   contact us so we can post a link to your location.